Direct Potentiometric Study of Cationic and Nonionic Surfactants in Disinfectants and Personal Care Products by New Surfactant Sensor Based on 1,3-Dihexadecyl−1H-benzo[d]imidazol−3-ium

A novel, simple, low-cost, and user-friendly potentiometric surfactant sensor based on the new 1,3-dihexadecyl−1H-benzo[d]imidazol−3-ium-tetraphenylborate (DHBI–TPB) ion-pair for the detection of cationic surfactants in personal care products and disinfectants is presented here. The new cationic surfactant DHBI-Br was successfully synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectrometry, liquid chromatography–mass spectrometry (LC–MS) and elemental analysis and was further employed for DHBI–TPB ion-pair preparation. The sensor gave excellent response characteristics for CTAB, CPC and Hyamine with a Nernstian slope (57.1 to 59.1 mV/decade) whereas the lowest limit of detection (LOD) value was measured for CTAB (0.3 × 10⁻⁶ M). The sensor exhibited a fast dynamic response to dodecyl sulfate (DDS) and TPB. High sensor performances stayed intact regardless of the employment of inorganic and organic cations and in a broad pH range (2−11). Titration of cationic and etoxylated (EO)-nonionic surfactant (NSs) (in Ba²⁺) mixtures with TPB revealed the first inflexion point for a cationic surfactant and the second for an EO-nonionic surfactant. The increased concentration of EO-nonionic surfactants and the number of EO groups had a negative influence on titration curves and signal change. The sensor was successfully applied for the quantification of technical-grade cationic surfactants and in 12 personal care products and disinfectants. The results showed good agreement with the measurements obtained by a commercial surfactant sensor and by a two-phase titration. A good recovery for the standard addition method (98–102%) was observed.     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

基于Au NPs@NU-901电化学传感器检测饼干中丁基羟基茴香醚的研究

基于金属有机骨架的拓扑三维结构的高比表面积以及金纳米颗粒(Au NPS)的优异电催化活性,金纳米颗粒与金属有机框架的复合材料在电化学传感领域拥有应用潜力。该文成功合成了Au NPs@NU-901复合材料,并采用透射电镜、X射线衍射、红外光谱以及X射线光电子能谱对其进行表征。采用线性扫描伏安法和差分脉冲伏安法研究了复合材料对丁基羟基茴香醚(BHA)电化学氧化反应的催化能力。结果表明,Au NPs@NU-901对BHA的电化学氧化具有较好的催化能力。基于Au NPs@NU-901制备电化学传感器用于BHA的定量检测,BHA的氧化峰电流与其浓度在0.10~50 μmol/L范围内呈现良好线性关系,相关系数(r2)为0.994 8,检出限(S/N=3)为0.049 μmol/L,相对标准偏差(RSD)为3.6%。将该传感器应用于饼干样品中BHA的检测,加标回收率为95.6%~104%,样品检测结果与高效液相色谱法的测定结果吻合。方法的选择性好、灵敏准确,适合于饼干中BHA的检测。     

Amorphous Carbon Film with Self-modified Carbon Nanoparticles Synthesized by Low Temperature Carbonization of Phenolic Resin for Simultaneous Sensing of Dopamine and Uric Acid

A self-modified film electrode consisting of homogeneous snowflake-shaped nanoparticles on the amorphous carbon substrate (HNAC) was prepared by low temperature carbonization of phenolic resin. Such a unique structure was beneficial to enhance the electroanalysis signal responds. Simultaneous detection of DA and UA was performed on the HNAC using differential pulse voltammetry (DPV) at pH 8 phosphate buffer. The well-defined oxidation peak potential separation reached 260 mV between DA and UA. Meanwhile, the detection limit of HNAC were 0.401 μM (DA) and 2.800 μM (UA).     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Gold Nanowires – Assisted Prussian Blue Enhancing Peroxidase – Like Activity for the Non-enzymatic Electrochemically Sensing H2O2 Released From Living Cells

Prussian blue nanoparticles (PBNPs) have peroxidase-like activity for H₂O₂. However, PB alone have poor electrochemical performances. Herein, a strategy was proposed by direct in-situ growth PBNPs onto gold nanowires (AuNWs) surface to obtain the peroxidase-like activity with about 4.05 times higher than that of PBNPs alone. PBNPs@AuNWs was employed to construct a non - enzymatic electrochemical H₂O₂ sensor with the detection limit of 5.3×10⁻⁹ mol/L (S/N=3). The sensor was successfully used to detect H₂O₂ in human serum samples or secreted from living HeLa cells. It may be a competitive candidate for H₂O₂ assaying in biological samples or cellular investigation.     

A Highly Sensitive and Selective Non-enzymatic Hydrogen Peroxide Sensor Based on Nanostructured Co3O4 Thin Films Using the Sol-gel Method

In this work we report an easy and efficient way to fabricate nanostructured cobalt oxide (Co₃O₄) thin films as a non-enzymatic sensor for H₂O₂ detection. Co₃O₄ thin films were grown on ITO glass substrates via the sol-gel method and characterized with several techniques including X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and optical absorbance. The Co₃O₄ thin films’ performance regarding hydrogen peroxide detection was studied in a 0.1 M NaOH solution using two techniques, cyclic voltammetry (CV) and amperometry. The films exhibited a high sensitivity of 1450 μA.mM⁻¹.cm⁻², a wide linear range from 0.05 μM to 1.1 mM, and a very low detection limit of 18 nM. Likewise, the Co₃O₄ thin films produced showed an exceptional stability and a high selectivity.     

Fabrication and Characterization of Zinc Oxide Nanowire Based Two-electrode Capacitive Biosensors on Flexible Substrates for Estimating Glucose Content in a Sample

The present work deals with fabrication and characterization of the zinc oxide (ZnO) nanowire based novel two-electrode capacitive biosensors on flexible Polyethylene terephthalate (PET) substrates for accurate estimation of glucose by analyzing the fundamental dielectric nature of the relevant sample. The morphology and crystalline quality of grown nanowires are analyzed by using field-emission scanning electron microscope (FESEM) and X-ray diffractometer (XRD), respectively. Current and capacitance values of the device have been studied for ten different glucose concentrations relevant to the physiological standards. The analytical performance of the devices in terms of enzyme activity, reliability and flexibility has also been evaluated.     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.